s418 FAAC Double Swing Gate Kit

Iron Gates

Closed Wooden Gates*

Specification Max Wing Length: 2.7m* Max Wing Weight: 500kg

Downloadable PDF's Datasheet Manual

* WIND AFFECTED GATES: A closed panel gate will be affected significantly by the wind, whereas an open pattern gate will offer little wind resistance. Imagine trying to hold on to a 6ft square panel in gusty conditions. This sail effect warrants an upgrade in equipment specified and may require the addition of an electronic lock. Call 0870 766 8704 for advice or click here for alternative options

Application: Swing-leaf gate operator for residential use, it has a long stroke & new multi-position attachments with fittings.

Features:
- Gates up to 500kg
- No need for hard stops in the floor
- This electromechanical swing gate operator uses 24V technology which makes it safer due to lower voltages being required to run the operator.
- Due to less voltage being required, the heat of operation is lower; therefore the operator can run at a higher duty cycle.
- There is a built in manual release device on the unit, and also an option of a battery backup, making the unit extremely reliable.
- Self learning of the operation cycle, through simple push button set-up makes installation straight forward.
- The unit contains integrated open and closing mechanical stops, which again saves time on installation and reduces costs.
- It has FAAC’s patented “2 easy” Bus technology making it easier to wire in accessories such as photocells.
- The operator is capable of moving a gate leaf up to 2.7m in length with lock, 2.3 no lock
- It has a long stroke and new multi-position fixing brackets which gives the operator more flexibility making it easy to install in a wide variety of applications.
- The unit has a locking gear mechanism that holds gates in both open and closed positions.
- Adjustable Speed settings
- Anti wind function

(* Use of the electric lock recommended over 2.3m)