BFT P7 Series Single Hydraulic Arm Kit (71/20 & 71/25 Required)

Iron Gates

Closed Wooden Gates*

Specification Max Wing Length: 7m Max Win Weight: 500kg

Downloadable PDF's Information Rigel 5 Information Instructions

* WIND AFFECTED GATES: A closed panel gate will be affected significantly by the wind, whereas an open pattern gate will offer little wind resistance. Imagine trying to hold on to a 6ft square panel in gusty conditions. This sail effect warrants an upgrade in equipment specified and may require the addition of an electronic lock. Call 0870 766 8704 for advice or click here for alternative options

To be purchased with: 71/20 - BFT EBP-24 E-Mech Transformer & also 71/25 - BFT ES-500 Water Resistant Magnetic Lock

Application: With a pulling force of 8500N. The P Series rams are high spec operators for large, wind affected gates. Very heavy duty.

Features:
- 7000 mm max gate leaf width
- 500 kg max leaf weight
- Operation time to 90 degrees approx 45 seconds
- Max 500 operations per 24hrs
- Slow down on closing
- Lock required (see above)

Kit Comprises:
- 1 x P4.5 rams
- 1 x Rigel 5 control panel with built in receiver
- 1 x Mitto 2 transmitters
- 1 x Pair Cellula 130 photocells
- 1 x Antenna